S 220 DEW POINT SENSOR (-100 °C … 0 °C)

  • Very fast response time ensures safe and reliable indication whenever dew points are out of valid ranges
  • Small size makes it ideal for dryer installations
  • Measures dew points down to –100 °C
  • New Nexuz sensor technology
  • Version with integrated pressure measurement
  • Various output versions available: 1 x 4 … 20 mA, 2 x 4 … 20 mA, RS-485 (Modbus), 4 … 20 mA loop powered
  • IP65 casing provides robust protection in rough industrial environment
  • Can be installed directly into dryers through G 1/2” thread
  • High accuracy of ±2 °C dew point
  • M12 connector

The Nexuz dew point sensor S 220 provides reliable and long term stable dew point monitoring in industrial applications. Nexuz is using a new sensor technology which has superior signals at very low moisture levels thus providing reliable measurements down to –100 °C.

A stainless steel mesh filter with pore sizes below 30 um protects the sensor from particles. It`s designed for applications where very low moisture levels needs to be detected. The measured dew point is output through a 4 … 20 mA signal (3-wire or loop powered). Sensor parameters such as analogue output scaling, physical units, can be easily changed by using Nexuz service kit.

S 212 DEW POINT SENSOR (-50 °C … +20 °C)

  • Dew point sensor for low dew point applications down to -50 °C
  • Long term stability
  • IP65 casing provides robust protection in rough industrial environment
  • Fast response time ensures safe and reliable indication whenever dew points are out of valid ranges
  • Can be installed directly into dryers through G 1⁄2” thread
  • High accuracy of ±2 °C dew point

The Nexuz dew point sensor S 212 provides reliable and long term stable dew point monitoring in industrial applications. The newly developed sensor features improved signal and stability in demanding industrial applications. It makes it an ideal choice for dew point measurements in desiccant dryers.

The measured dew point is output via a 4 … 20 mA signal output. The compact size of the sensor makes it an ideal choice for installations in tight environments. Sensor parameters such as analogue output scaling, alarm values, units, etc, can be easily changed by using Nexuz service kit. This kit is used to connect the sensor to a PC for configuration changes.

S 215 DEW POINT SENSOR (-20 °C … +50 °C)

  • Dew point sensor for dew point applications down to -20 °C
  • Long term stability
  • IP65 casing provides robust protection in rough industrial environment
  • Fast response time ensures safe and reliable indication whenever dew points are out of valid ranges
  • Can be installed directly into dryers through G 1⁄2” thread
  • High accuracy of ±2 °C dew point

The Nexuz dew point sensor S 215 provides reliable and long term stable dew point monitoring in industrial applications. The newly developed sensor features improved signal and stability in demanding industrial applications. It makes it an ideal choice for dew point measurements in desiccant dryers.

The measured dew point is output via a 4 … 20 mA signal output. The compact size of the sensor makes it an ideal choice for installations in tight environments. Sensor parameters such as analogue output scaling, alarm values, units, etc, can be easily changed by using Nexuz service kit. This kit is used to connect the sensor to a PC for configuration changes.

S 217 OEM DEW POINT SENSOR (-50 °C … +50 °C)

  • Small size makes it ideal for dryer installations
  • Measures dew points down to -50 °C
  • 2-wire or 3-wire output
  • IP65 casing provides robust protection in rough industrial environment
  • Very fast response time ensures safe and reliable indication whenever dew points are out of valid ranges
  • Can be installed directly into dryers through G 1/2” thread
  • High accuracy of 1 °C … 2 °C dew point
  • Withstands condensation
  • M8 connector and cable with open wires

The Nexuz dew point sensor S 217 provides reliable and long term stable dew point monitoring in industrial applications. The newly developed sensor features improved signal and stability in demanding industrial applications.

It’s designed for OEM applications in desiccant and refrigeration dryers. Through our new sensor technology paired with a compact casing, S 217-OEM can be offered at very attractive prices. This allows applications in smaller dryers and point of use dryers using a more energy efficient dew point control. The measured dew point is output via the loop-powered 4 … 20 mA signal or 3 wire 4 … 20 mA output. Sensor parameters such as analogue output scaling, physical units, can be set ex factory.

S 201 DEW POINT SENSOR (-60 °C … +20 °C)

  • Dew point sensor for low dew point applications down to -60 °C
  • Long term stability
  • Graphic display
  • Relay output
  • IP65 casing provides robust protection in rough industrial environment
  • Fast response time ensures safe and reliable indication whenever dew points are out of valid ranges
  • Can be installed directly into dryers through G 1⁄2” thread
  • High accuracy of ±2 °C dew point

The Nexuz dew point sensor S 201 provides reliable and long term stable dew point monitoring in industrial applications. The newly developed sensor features improved signal and stability in demanding industrial applications. The measured dew point is output via a 4 … 20 mA signal output. The integrated display shows online measurement values and alarm status. One alarm can be programmed which will activate a relay.

S 201 features a complete dew point meter with sensor, display, keyboard and alarm. Sensor parameters such as analogue output scaling, alarm values, units, etc, can be easily changed by using our service kit, which is used to connect the sensor to a PC for configuration changes.

S 305 DEW POINT MONITOR (-20 °C … +50 °C)

  • Measures down to –20 °C dew point
  • Plug & Play
  • Compressed air supply through 6 mm quick-connector
  • Power supply: 100 … 240 VAC
  • Wall or panel mountable
  • Accuracy: 1 … 2 °C
  • IP65 casing provides robust protection in rough industrial environment
  • 4 … 20 mA output to PLC or SCADA system
  • Pre– and Main-Alarm programmable: Optical (red blinking display), 2 relay outputs

Refrigeration dryers are among the dryers in compressed air treatment most commonly used. If the required drying is not achieved, the impact of wet air can be serious: Rust in the pipes, failures of machines , and a negative impact on product quality. Nexuz offers with the S 305 a measuring device for dew point monitoring that kicks in alarm indications when drying values are not within the desired range.

The All-In-One dew point monitor serves as a measuring and display device. The connection to the compressed air network is via a 6 mm quick-connector and corresponding connecting hose. The entire measuring unit is integrated together with the display in a rugged housing (IP 65) and is available both as a panel variant or as a wall-mounted housing. Two alarm levels can be programmed (pre and main alarm), serving an optical indications or separate relay outputs. The dew point meter allows a simple and inexpensive dew point monitoring.

S 505 DEW POINT METER (-100 °C … +50 °C)

  • Portable dew point meter
  • Measures dew point, temperature and pressure (all in one instrument)
  • 3 sensor solutions available:
    A: -100 … -30 °C sensor for trace moisture applications
    B: -50 … +50 °C sensor for standard applications
    A+B: covering the full range of dew point measurement
  • Modern color touch screen interface
  • Data logger, USB interface, Bluetooth connection to portable printer
  • Measuring / parking chamber for fast sensor response
  • Application software included

With the S 505 Nexuz has combined next generation measurement technology with modern user interface design. The experienced user knows that dew point measurement also requires the measurement of line pressure (according to ISO 8573), since dew point is pressure dependent. With the S 505 the line pressure is measured in combination with the dew point, so the user can be confident that the calculation is accurate and free from human error.

The S 505 comes with two sensor units: Sensor A uses the new QCM technology which provides fast and accurate measurement results at dew points below –30 °C down to –100 °C. Sensor B is for high moisture applications from -50 °C … +50 °C where the Nexuz polymer sensor is more suitable. Both sensors can be easily exchanged.

Welcome

Welcome to official site of PT.Calistacitra Lestari, our company dedicated as a specialized trading in Purification of Compressed Air and Gases System

Product

Compressed air accounts for about 10% of the global energy used in industry today. This is why it makes economical sense to...

PT Calistacitra Lestari Newsletter

Theme redesign by ONEZZZ for PT.Calistacitra Lestari.